The research of market structures for remanufactured products

The rapid development of technology has made it easier to distribute products directly, and many enterprises excel at executing a multi-channel strategy to distribute products. The introduction of direct channel adds a new competition dimension to the enterprises. This paper considers three market channel structures: R-Channel, D-Channel and H-Channel. In R-Channel, both new products and remanufactured products are sold through a retailer. In D-Channel, new products are sold through retailers and remanufactured products are sold directly to consumers. In H-Channel, new products are sold through retailers, while remanufactured products through dual channel. Using the game theory, we obtain and analyse the equilibrium prices, market demands and the profits gain under these three settings. At the same time, the influence of consumers’ willingness to pay on the environment performance is researched. Our results show that the manufacturer prefers H-Channel. By introducing the direct channel the manufacturer is always economically better off, but it is not for the retailer. The numerical simulation also confirms the theoretical analysis and shows that H-Channel has advantages of economic benefit and environmental performance. It is feasible for practical application.     

Impact of floodplain and Stage 0 stream restoration on flood attenuation and floodplain exchange during small frequent storms

River flooding impacts human life and infrastructure, yet provides habitat and ecosystem services. Traditional flood control (e.g., levees, dams) reduces habitat and ecosystem services, and exacerbates flooding elsewhere. Floodplain restoration (i.e., bankfull floodplain reconnection and Stage 0) can also provide flood management, but has not been sufficiently evaluated for small frequent storms. We used 1D unsteady Hydrologic Engineering Center's River Analysis System to simulate small storms in a 5 km-long, second-order generic stream from the Chesapeake Bay watershed, and varied % channel restored (starting at the upstream end), restoration location, restoration bank height (distinguishes bankfull from Stage 0 restoration), and floodplain width/Manning's n. Stream restoration decreased (attenuated) peak flow up to 37% and increased floodplain exchange by up to 46%. Floodplain width and % channel restored had the largest impact on flood attenuation. The incremental effects of new restoration projects on flood attenuation were greatest when little prior restoration had occurred. By contrast, incremental effects on floodplain exchange were greatest in the presence of substantial prior restoration, setting up a tradeoff. A similar tradeoff was revealed between attenuation and exchange for project location, but not bank height or floodplain width. In particular, attenuation and exchange were always greater for Stage 0 than for bankfull floodplain restoration. Stage 0 thus may counteract human impacts such as urbanization.     

Measuring bed shear stress along vegetated river beds using FST-hemispheres

The measurement of the bed shear stress along vegetated river beds is essential for accurately predicting the water level, velocity and solute and sediment transport fluxes in computational hydroenvironmental models. Details are given herein of an experimental and theoretical study to determine the bed boundary shear stress along vegetated river beds introducing a novel field measuring method, namely the FliessWasserStammtisch (FST)-hemispheres. Although investigations have been conducted previously for sedimentary channels using the FST-hemispheres, this preliminary study is thought to be the first time that such hemispheres have been used to investigate the bed shear stresses in vegetated channels. FST-hemispheres were first developed by Statzner and Müller [1989. Standard hemispheres as indicators of flow characteristics in lotic benthos research. Freshwater Biology 21, 445-459] to act as an integrated indicator of the gross hydrodynamic stresses present near the bed. Test and validation data were found to be at least of the same order of magnitude for the stresses predicted from literature for sedimentary channels, with this study establishing the commencement of a database of calibrated FST-hemisphere laboratory data for vegetated channel beds. In a series of experiments, depths ranging from 0.1 to 0.28m were considered, equating directly to comparable conditions in small rivers or streams. The results of this study provide a basis for enabling the FST-hemispheres to be used to evaluate the boundary shear stress for a wider range of applications in the future, including vegetated river beds.     

京津冀大气污染传输通道区大气污染时空格局研究

客观理解京津冀大气污染传输通道城市（“2+26”城市）空气污染时空格局对于区域大气污染联合防治具有重要意义.本研究采用遥感数据反演的PM_2.5浓度产品，利用趋势分析法和重心分析法，揭示了京津冀城市大气污染传输通道区2000~2015年大气污染时空格局演化特征.结果表明：（1）区域PM_2.5平均浓度整体呈现出太行山脉区域较低，太行山脉以东较高的格局，城镇地区明显高于周边地区.（2）2000~2015年区域PM_2.5年均浓度总体呈增加趋势，主要表现在2000~2007年，呈显著增加趋势的面积占全区的88.48%，之后呈稳定状态.（3）区域PM_2.5污染重心位于衡水、邢台和德州3市交界处，区域北部大气污染较严重.本研究可为京津冀及周边地区大气污染防治政策制定和措施实施提供参考与支持.     

导流明沟人工湿地治理橡胶废水实践

运用人工湿地原理，采用明沟导流治理橡胶生产废水，其工程投资低，占地面积小，运行稳定，易于管理，去除率高，处理后废水达到国家标准。     

基于正交试验方法的毛细矩形槽道平均流速影响因素分析

目的分析毛细矩形槽道平均流速的影响因素。方法通过公式推导毛细矩形槽道平均流速的有关影响因素,并且从中提取出部分因素,选用三因素三水平的正交试验表对流速进行分析,三因素分别为槽道宽度、槽道深度、槽道长度。通过CFX仿真得出对应的平均流速。结果得到了各因素水平变化对毛细矩形槽道平均流速的影响程度。槽道宽度及槽道深度对于毛细槽道平均流速具有比较大的影响,并得到最优的水平组合。结论对于毛细矩形槽道平均流速的影响因素给出了比较清晰的剖析,对于毛细矩形槽道传热的优化分析具有一定的参考意义。     

昆明城市生态河道建设探讨

在城市河道治理过程中，由于只片面强调防洪、排水，忽略了河道的其他功能，致使河道越挖越宽、越挖越深、越修越直，而河水越来越臭、越来越脏。建设生态河道是解决这些问题的唯一出路，既要顾及河道排洪、防洪等基本功能，又要保持河道生态系统的完整性。     

COLD WATER PATCHES IN WARM STREAMS: PHYSICOCHEMICAL CHARACTERISTICS AND THE INFLUENCE OF SHADING1

ABSTRACT: Discrete cold water patches within the surface waters of summer warm streams afford potential thermal refuge for cold water fishes during periods of heat stress. This analysis focused on reach scale heterogeneity in water temperatures as influenced by local influx of cooler subsurface waters. Using field thermal probes and recording thermistors, we identified and characterized cold water patches (at least 3°C colder than ambient streamflow temperatures) potentially serving as thermal refugia for cold water fishes. Among 37 study sites within alluvial valleys of the Grande Ronde basin in northeastern Oregon, we identified cold water patches associated with side channels, alcoves, lateral seeps, and floodplain spring brooks. These types differed with regard to within floodplain position, area, spatial thermal range, substrate, and availability of cover for fish. Experimental shading cooled daily maximum temperatures of surface waters within cold water patches 2 to 4°C, indicating a strong influence of riparian vegetation on the expression of cold water patch thermal characteristics. Strong vertical temperature gradients associated with heating of surface layers of cold water patches exposed to solar radiation, superimposed upon vertical gradients in dissolved oxygen, can partially restrict suitable refuge volumes for stream salmonids within cold water patches.     

CHEMISTRY OF COALBED METHANE DISCHARGE WATER INTERACTING WITH SEMI‐ARID EPHEMERAL STREAM CHANNELS1

ABSTRACT: The objective of this study was to examine the chemistry of Coalbed Methane (CBM) discharge water reacting with semi‐arid ephemeral stream channels in the Powder River Basin, Wyoming. The study area consisted of two ephemeral streams: Burger Draw and Sue Draw. These streams are tributaries to the perennial Powder River. Samples were collected bimonthly from three CBM discharge points and seven channel locations in Burger Draw and Sue Draw. Samples were also collected bimonthly from the Powder River above and below the confluence of Burger Draw. Before sample collection, the pH and electrical conductivity (EC) were measured in the field. Samples were transported to the laboratory and analyzed for alkalinity, major cations, and anions. From the measurement of sodium (Na), calcium (Ca), and magnesium (Mg), practical sodium adsorption ratio (SARp) and true sodium adsorption ratio (SARt) were calculated. Results suggest pH and EC of CBM discharge water was 7.1 and 4.3 dS/m, respectively. The CBM discharge water consisted of higher concentrations of sodium and alkalinity compared to other components. The pH of CBM discharge water increased significantly (p = 0.000) in the downstream channel of Burger Draw from 7.1 to 8.84 before it joined with the Powder River. Dissolved calcium concentration of CBM discharge water decreased significantly (p = 0.000) in the downstream channel water. Subsequently, SARp increased approximately from 24 to 29. The SARt also increased significantly (p = 0.001) in the downstream channel water. For instance, SARt of CBM discharge water increased from 32.93 to 45.5 downstream channels after the confluence of Sue Draw with the Burger Draw. The only significant difference in water chemistry above and below the confluence of Burger Draw with the Powder River was pH, which increased from 8.36 to 8.52. The significant increase in SAR values of CBM discharge water in Burger Draw and Sue Draw tributaries suggest a careful monitoring of salinity and sodicity is needed if CBM discharge water is used for irrigation in semi‐arid environments. Results discussed in this study will be useful to downstream water users who depend on water for irrigation.     

Improving the Urban Stream Restoration Effort: Identifying Critical Form and Processes Relationships

Stream restoration projects are often based on morphological form or stream type and, as a result, there needs to be a clear tie established between form and function of the stream. An examination of the literature identifies numerous relationships in naturally forming streams that link morphologic form and stream processes. Urban stream restoration designs often work around infrastructure and incorporate bank stabilization and grade control structures. Because of these imposed constraints and highly altered hydrologic and sediment discharge regimens, the design of urban channel projects is rather unclear. In this paper, we examine the state of the art in relationships between form and processes, the strengths and weaknesses of these existing relationships, and the current lack of understanding in applying these relationships in the urban environment. In particular, we identify relationships that are critical to urban stream restoration projects and provide recommendations for future research into how this information can be used to improve urban stream restoration design. It is also suggested that improving the success of urban restoration projects requires further investigation into incorporating process-based methodologies, which can potentially reduce ambiguity in the design and the necessity of using an abundant amount of in-stream structures.